800 Primo Inset Stove with Flue-valve
This fireplace was designed for optimizing your comfort with its improved performance, sleek design and affordable price.
Why this product?
Clean
glass
The
clean glass system slows deposit buildup on the glass. An air supply above the
glass creates a protective curtain. The preheated air is propelled along the
glass. It triggers combustion of gas and volatile materials, thereby protecting
the glass against smoke and soot deposits.
Intermittent
and 3 hour extended burning
The
unit can alternate between intermittent and extended burning mode. Intermittent
mode requires frequent addition of new wood. It is particularly high-performing
and respectful of the environment. Extended burning mode, with a low flame,
enables 3 hours of operation without intervention.
Nozzle
flap
The
nozzle valve can be used to adjust the unit’s draft. Its controls are located
below the door of the unit. Open the nozzle flap before opening the door of the
unit to avoid smoke spillage.
Origine
France Garantie (Made in France Guarantee)
The
Origine France Garantie is the only certification that certifies a product was
manufactured in France. This labeling is validated by an independent
organization, after an audit. (Bureau Veritas No.7208672). OFG products are
manufactured in France at Invicta Group manufacturing sites.
Post-combustion
system
Injection
of pre-heated air into the combustion chamber The supplementary air intake in
the back enables hydrocarbons to be destroyed at a high temperature. Complete
combustion reduces pollution.
Features
OPTIMAL
HEAT OUTPUT (KW)
12 kW
HEAT
OUTPUT ADJUSTMENT (KW)
8 - 18 kW
HEATING
VOLUME (M³)
160 to 360 m³
HEATING
SURFACE (M²)
65 to 145 m²
USEFUL
EFFICIENCY (%)
77%
SEASONAL
EFFICIENCY (%)
67
CO
(%)
0,12 %
CO
(MG/NM³)
1500
DUST
(MG/NM³)
30 mg/Nm³
GOC
(MG/NM³)
120
NOX
(MG/NM³)
160
ENERGY
EFFICIENCY INDEX (EEI)
102
FLUE
GAS MASS FLOW (G/S)
12,7
FLUE
GAS TEMPERATURE (°C)
310
COMBUSTIBLE
33 cm logs
MAXIMUM
LOG LENGTH (HORIZONTALLY)
60 cm
LOADING
Front
FLUE
EXIT
Top
FLUE
DIAMETER (MM)
200 mm
DIMENSIONS
- H * W * D (MM)
849 x 795 x 494
WEIGHT
(KG)
154
DESIGN
Traditional
CATEGORY
OF THE FEEDER (OPENING, INSERTS)
800
MATERIAL
Cast Iron
FINISH
Anthracite
STANDARD
EN 13229
WARRANTY
5 years
