Why this product?

Clean glass

The clean glass system slows deposit buildup on the glass. An air supply above the glass creates a protective curtain. The preheated air is propelled along the glass. It triggers combustion of gas and volatile materials, thereby protecting the glass against smoke and soot deposits.

Connectable

Can be connected directly from the wood stove’s fresh air intake to the outside or a crawlspace.

Intermittent and 3 hour extended burning

The unit can alternate between intermittent and extended burning mode. Intermittent mode requires frequent addition of new wood. It is particularly high-performing and respectful of the environment. Extended burning mode, with a low flame, enables 3 hours of operation without intervention.

Nozzle flap

The nozzle valve can be used to adjust the unit’s draft. Its controls are located below the door of the unit. Open the nozzle flap before opening the door of the unit to avoid smoke spillage.

Origine France Garantie (Made in France Guarantee)

The Origine France Garantie is the only certification that certifies a product was manufactured in France. This labeling is validated by an independent organization, after an audit. (Bureau Veritas No.7208672). OFG products are manufactured in France at Invicta Group manufacturing sites.

Post-combustion system

Injection of pre-heated air into the combustion chamber The supplementary air intake in the back enables hydrocarbons to be destroyed at a high temperature. Complete combustion reduces pollution.

Features

OPTIMAL HEAT OUTPUT (KW)

10 kW

HEAT OUTPUT ADJUSTMENT (KW)

6.5 - 15 kW

FLAMME VERTE (ENVIRONMENTAL LABEL)

7 stars

HEATING VOLUME (M³)

135 to 300 m³

HEATING SURFACE (M²)

55 - 120 m²

USEFUL EFFICIENCY (%)

76 %

SEASONAL EFFICIENCY (%)

66

CO (%)

0,10 %

CO (MG/NM³)

1250

DUST (MG/NM³)

30 mg/Nm³

GOC (MG/NM³)

100

NOX (MG/NM³)

160

ENERGY EFFICIENCY INDEX (EEI)

100

FLUE GAS MASS FLOW (G/S)

8,8

FLUE GAS TEMPERATURE (°C)

320

COMBUSTIBLE

Logs 25, Logs 33, Logs 50 cm

MAXIMUM LOG LENGTH (HORIZONTALLY)

50 cm max (33 cm recommended)

LOADING

Front

FLUE EXIT

Top

FLUE DIAMETER (MM)

180 mm

DIRECT AIR-SUPPLY (MM)

50 mm

DIMENSIONS - H * W * D (MM)

659 x 692 x 452

WEIGHT (KG)

110 kg

DESIGN

Traditional

CATEGORY OF THE FEEDER (OPENING, INSERTS)

700

MATERIAL

Cast Iron

FINISH

Anthracite

STANDARD

EN 13229

WARRANTY

5 years